On-device AI — professional-grade, fully private.

Images

How to Reverse a GIF Online (Play It Backwards or Make a Boomerang)

Reverse a GIF to play it backwards, or build a boomerang loop that runs forward and back. Keeps each frame's timing and the loop count. Runs on your device.

Updated November 7, 20268 min read

To play a GIF backwards, add it to the GIF reverser, leave the order on Reverse and press Download. To make it run forward and then back so it loops without a jump, choose Boomerang instead. Both take a few seconds, and each frame keeps its own display time, so an animation with a long pause at the end comes back with that pause at the start, which is what a true reversal should do. This guide covers the difference between the two modes, how to reverse only a section, what happens to the loop count and the file size, and the cases where a GIF cannot simply be flipped.

Reverse or boomerang: which one do you need?

The tool's Order setting has two choices, and they solve different problems.

You want…ChooseWhat you get
A rewind effect, an undo, a reveal run in reverseReverseThe last frame plays first, the first frame plays last
A loop with no visible jump when it restartsBoomerangForward, then back to the start, then forward again
Only the middle of a clip to run backwardsReverse with A rangeFrames outside the range stay where they are
A shorter or faster resultReverse, then change the speedThe same frames, played at a new pace

A plain reversal keeps the number of frames and the total running time exactly as they were. A boomerang is longer, because it plays the animation twice in one cycle. The tool writes it so that no picture is shown twice in a row: the last frame is not repeated at the turn and the first frame is not repeated where the loop restarts. An eight-frame animation becomes a fourteen-frame boomerang, not sixteen, and the motion does not hesitate at either end.

How to reverse a GIF, step by step

1

Add the GIF

Open the GIF reverser and drop the file on the page, or click Choose a file. Animated WebP and APNG files open too, but the result is always a GIF.

2

Pick the order

Under Order, choose Reverse or Boomerang. The line under the settings tells you how many frames go in and come out, and how the running time changes.

3

Choose which frames

Leave Which frames on Whole animation, or switch to A range and fill in First frame and Last frame to flip just that section. The numbers are counted from 1 and both ends are included.

4

Set the loop count

Under How many times it plays, leave Keep to preserve the original behaviour, or pick Forever, Once or A set number.

5

Press Reverse, then Download

Play the preview. If you change a setting afterwards, press Re-apply, then Download.

Play a GIF backwards or loop it forward and back, with each frame's timing kept. Free: one GIF at a time, up to 50 MB, 300 frames and 2,048 px on the longest edge. Pro: up to 20 GIFs at once, downloaded as one ZIP. Runs on your device, not our servers.

Reverse a GIF

Timing: each frame keeps its own delay

Every frame in a GIF has its own display time, usually written in hundredths of a second. Real GIFs rarely use one value throughout. A common pattern is a quick sequence of frames followed by a long hold on the last one, so the viewer has time to read a caption or take in the punchline.

If a tool reverses the pictures but leaves the list of delays where it was, nothing looks wrong on paper: the frame count matches and the total time matches. But the long hold now sits on whatever picture happens to be at that position, which is the wrong one. In this tool the delay travels with its frame, so the reversed file is a true mirror. Play it backwards in your head and you get the original, frame for frame. When you want a different rhythm on purpose, do it as a second step with the GIF speed changer, covered in how to change GIF speed.

Reversing only part of a GIF

Many GIFs have a still moment at the start or end: a title, a pause before the action, a final pose. Reversing the whole file moves those too. Switching Which frames to A range reverses only the section you name. Frames before it and after it keep their positions and their order, and a note under the settings reads, for example, "Reversing frames 12 to 40 of 60."

A range of one frame changes nothing, since a single frame has no order to flip. The tool says so instead of handing you an identical copy. The same range also applies in Boomerang mode: only that section runs forward and back, and the frames around it play once. If you need to know which frame number is which, the GIF splitter lays them out one by one.

Loop count: forever, once, or a number

The setting How many times it plays has four options: Keep, Forever, Once and A set number. Keep is the default and leaves the file's own behaviour untouched, which matters because plenty of GIFs are set to play through once and stop. Forcing a loop onto a file that was meant to play once would change how it looks on the page.

SettingResultGood for
KeepSame looping as the sourceAnything you do not want to change
ForeverRepeats endlesslyBoomerangs, reaction clips, icons
OncePlays one time and stopsA reveal or a rewind that should end on a final frame
A set numberPlays that many times in totalA short loop that should settle after a few repeats

The GIF format stores looping in an odd way: the saved number counts repeats after the first play, and zero means forever. The tool takes the number of plays you want and writes the right thing for you, so you do not need to subtract one.

What happens to the file size

A plain reversal usually leaves the size almost exactly where it was. When the file allows it, the compressed frames are copied out in the new order rather than redrawn, so no colours are re-chosen and nothing is dithered a second time. The result panel states whether the frames were copied or rebuilt.

CaseExpect
Plain reverse, frames copiedSize within a byte or two of the original
Plain reverse, frames rebuiltLarger or smaller, because the palette and frame differences are recomputed
BoomerangClose to double, since it stores almost twice as many frames
Animated WebP or APNG inA new GIF, sized by its own palette and frame count

If a boomerang comes out too heavy for where you want to post it, run the result through the GIF compressor; the guide to compressing a GIF explains which settings cost the least quality. Reversing and then compressing, in that order, is better than the other way round, because the compressor then only has to work once.

When a GIF cannot just be flipped

Most GIFs you download are optimised. Instead of storing every frame as a complete picture, the encoder stores frame 12 as a small rectangle covering only what changed since frame 11, and marks the rest transparent. Those patches only make sense in forward order. Written backwards, each one lands on the wrong base picture and you get smears and half-drawn shapes.

The tool checks for this. If any frame depends on the one before it, the animation is first assembled into full pictures, then reversed, then encoded again. That is slower and it picks a new palette, but it is the only correct answer, and the panel tells you which path ran and why. Under If the animation has to be redrawn you can then set the Palette size and the Dithering (None, Ordered or Diffusion). These controls only matter on that rebuild path.

  • Size. Free takes one file up to 50 MB, 300 frames, and 2,048 px on the longest edge. A larger animation is refused with a message that names the limit.
  • Still images and video. A single-frame file has no order to reverse. For a video clip, make a GIF first with video to GIF.
  • Symmetric animations. A pendulum, a pulse or a fade in and out looks the same reversed. The tool warns you when the order it would write is identical to the one it read.
  • Sound. GIFs have none, so there is nothing to reverse there.

Good uses for a reversed GIF

  • A rewind or undo effect. Run a build-up backwards to get a teardown from the same recording.
  • A seamless loop. A clip that ends somewhere other than where it started jumps on every repeat. Boomerang removes the jump.
  • Product spins. Reversing the second half of a turntable makes the object rock instead of spin.
  • Reaction clips. A two-second reaction often reads better as a ping-pong than as a hard repeat.
  • Checking your own animation. Motion that only reads in one direction usually has a timing problem. Reversing it shows you quickly.

Because the work runs on your device, personal clips and unreleased designs are not sent to a server to be reversed.

Frequently asked questions

How do I reverse a GIF online?

Add the GIF to the reverser, keep the order on Reverse, and press Download. For a loop that goes forward and then back, choose Boomerang. Free covers one GIF at a time up to 50 MB.

How do I make a boomerang or ping-pong GIF?

Choose Boomerang under Order. The animation plays forward and then back to the start. The two turn frames are dropped so no picture is shown twice in a row, which keeps the loop smooth.

Does reversing a GIF lower its quality?

Not when the file allows a straight copy: the compressed frames are written out in the new order, so the colours are untouched. If the frames are patches over each other, the animation has to be redrawn with a new palette, and the panel tells you so.

Will the timing and the loop count stay the same?

Each frame keeps its own delay, so a pause at the end becomes a pause at the start. The loop count stays as it was unless you pick Forever, Once or a set number under How many times it plays.

Can I reverse only part of a GIF?

Yes. Switch Which frames to A range and give a First frame and a Last frame. Frames outside the range keep their place and order.

Why is my boomerang GIF so much bigger?

A boomerang stores almost twice as many frames, so the file grows by close to double. Compress it afterwards with the GIF compressor, or reverse a shorter range of the clip.

Keep reading

More in Images →