On-device AI — professional-grade, fully private.

Images

How to Reduce Image Size Without Losing Quality (Which Settings Actually Matter)

Reduce image size in KB or MB and keep it sharp: the quality value to pick, why dimensions beat the slider, which format to use, and target sizes by use.

Updated November 1, 20267 min read

You can usually cut a photo to a fifth or a tenth of its size and not see the difference, but only if you pull the right levers in the right order. Resize the picture to the size it will actually be shown at, save it as JPG or WebP at a quality of about 75 to 85, and stop there. The quality slider on its own is the weakest lever, and pushing it too far is how photos end up looking smeared. This guide explains what is really happening to the file, where artefacts begin, and what size to aim for in each situation.

Lossy and lossless: what you are really giving up

Lossless compression shrinks a file by storing the same information more cleverly, like writing "20 white pixels" instead of listing twenty of them. Open the result and every pixel is identical to the original. PNG works this way. Lossy compression shrinks a file by throwing away detail the eye is poor at noticing: tiny colour differences, very fine texture, faint noise. JPG and WebP work this way, and the loss is permanent.

For photographs, lossy wins by a wide margin because a photo is full of smooth gradients and noise that lossless methods cannot squeeze. For screenshots, logos and anything with sharp text on flat colour, lossless is often smaller and always cleaner. "Without losing quality" therefore has two honest meanings: no pixel changes at all (lossless), or no change you can see at normal viewing size (lossy at a sensible setting). Almost everyone asking this question wants the second.

Which quality value to pick

The quality number is not a percentage of the picture you keep. It is a setting for how aggressively the encoder discards detail, and the relationship with file size is steep at the top and flat at the bottom. Going from 100 to 85 often removes more than half of the file with nothing visible changing. Going from 85 to 60 saves less and starts to cost you. In the Image Compressor the Quality slider runs from 20 to 95, which covers the useful range.

QualityWhat you getGood for
90 to 95Very close to the original; the file is still much smaller than a camera filePrints, portfolios, images you will edit again
80 to 85No visible difference at normal size; the best all-round settingWebsite photos, hero images, sharing
70 to 75Small differences only when you zoom inBlog images, email, product thumbnails
50 to 65Soft edges and faint blocks around text and hard edgesSmall previews and backgrounds
Below 50Visible blocks, smeared skin, colour bandingOnly when a size limit forces it

Artefacts show up first where there is a sharp edge against a smooth area: the outline of a face against a sky, text on a photo, a thin branch. You will see a faint fuzz or small squares around the edge, and flat skies turn into visible bands. If you cannot spot any of that at the size the picture will be displayed, the setting is fine.

Dimensions matter more than the slider

File size follows the number of pixels. A phone photo of 4000 by 3000 holds 12 million pixels. Cut it to 2000 by 1500 and it holds 3 million, a quarter as many, so the file drops to roughly a quarter before the quality setting does anything. A website that shows the picture 800 pixels wide gains nothing from the other 3200 pixels; they are just bytes the visitor downloads.

So the order is: first resize to the largest size the picture will be shown at (allow double that for sharp phone screens), then compress. If you do it the other way round, you spend your quality budget describing pixels nobody will see. The full explanation of how dimensions, file size and DPI relate is in file size, dimensions, resolution and DPI, and resizing without losing quality covers the resize step.

Reducing an image step by step

1

Keep the original

Work on a copy. Every lossy save throws detail away for good, so you want the untouched file in case you need a different size later.

2

Resize if the picture is larger than its use

Open the Image Resizer, set the width the picture will be shown at, and keep the aspect ratio locked so nothing stretches.

3

Open the compressor and choose how to compress

In the Image Compressor, the Compress by setting offers Quality and Target size. Choose Quality to set the value yourself (start at 80), or Target size when a form or email limit gives you a number.

4

Pick the output format

Leave Output format on Same as original to keep the format, or choose JPEG, WebP, AVIF or PNG. For a photo going on a website, WebP or JPEG is the usual choice.

5

Compare and download

Each result shows how much smaller it is. Look at the image at the size it will be used. If it looks right, download it. If not, raise the quality by 5 and run it again from the original.

Set a quality or a target size and see the saving before you download. Free: one image at a time, up to 25 MB, exported up to 4096 pixels on the longest side. Pro: batches of up to 100. It all runs on your device, not our servers.

Compress an image

Choosing a format: JPG, WebP, AVIF or PNG

The format sets the ceiling for how small a photo can get at a given look. JPG is the safe default that opens everywhere. WebP usually produces a noticeably smaller file than JPG at the same look and is supported by all current browsers; AVIF can be smaller still but is slower to produce and is not accepted by every upload form or older program. PNG is for transparency, screenshots and flat graphics, where it keeps edges perfectly crisp.

A PNG has no quality dial. The compressor shrinks it by reducing how many colours it stores, so a photograph saved as PNG stays large. If a photograph is in PNG and does not need transparency, converting it to JPG or WebP is the single biggest saving available. Use the image converter or go straight to JPG to WebP. The trade-offs are laid out in PNG vs JPG vs WebP.

Target file sizes by use

These are practical starting points, not rules. The compressor's Target size mode has presets for 50 KB, 100 KB, 200 KB, 500 KB and 1 MB, and it never produces a file larger than the number you set. If quality alone cannot reach the target, it scales the image down to fit.

UseAim forNotes
Email attachmentUnder 1 MB per photoMind the total; see the Gmail attachment limit
Website hero image150 to 300 KBAbout 1600 to 2000 pixels wide, JPG or WebP at 75 to 80
Blog or article photo60 to 150 KBAbout 800 to 1200 pixels wide
Product photo100 to 250 KBKeep it sharp; shoppers zoom in
Thumbnail or avatarUnder 30 KBA few hundred pixels is enough
Online form uploadWhatever the form saysSee images for online forms and 20 KB images

What goes wrong

  • The file got bigger. The source was already compressed hard, and saving it at a higher quality adds bytes without adding detail. Lower the quality, or keep the original.
  • Text and logos look fuzzy. Lossy formats struggle with sharp edges. Use PNG for those, or raise the quality to 90 and above.
  • Skies show bands. Smooth gradients are the first thing a low quality setting damages. Raise the quality, or resize first so the encoder has fewer pixels to describe.
  • A form still rejects the file. Many forms check the pixel dimensions as well as the size. Read both limits before optimising for one.
  • Colours look different. A few programs read images without colour profiles differently. Compare in the same viewer before you decide something changed.

Frequently asked questions

How can I reduce the size of an image without losing quality?

Resize it to the size it will be displayed at, then save it as JPG or WebP at a quality of 75 to 85. At that setting the difference is not visible at normal size, and the file is often a fifth or a tenth of the original.

How do I reduce an image size in KB?

Open the Image Compressor, set Compress by to Target size, and enter the limit or choose a preset such as 100 KB. The result is never larger than that number. If quality alone cannot reach it, the image is scaled down to fit.

What quality should I use when I compress a JPEG?

Start at 80. For prints and images you will edit again use 90 or more; for email and blog images 70 to 75 is usually fine. Below about 60 you start to see blocks around sharp edges.

Is compressing an image the same as resizing it?

No. Compressing changes how much detail is stored per pixel and keeps the dimensions the same. Resizing changes the number of pixels. Resizing usually saves more, so do it first, then compress.

Does compressing a photo more than once make it worse?

Yes, for JPG and WebP. Every save loses a little more detail. Always go back to the original file and compress once at the setting you want.

Is it free, and does it upload my photo?

The compressor is free for one image at a time, up to 25 MB, and Pro adds batches. The compression runs on your device, so the photo is not sent to our servers.

Keep reading

More in Images →