On-device AI — professional-grade, fully private.

Documents

How to Read a QR Code From an Image, Screenshot or Photo

Scan a QR code from a screenshot, photo or PDF page without a phone camera. Why a code will not read, what the result means, and how to check a link first.

Updated November 7, 20268 min read

To read a QR code from a picture, open the QR code reader, drop the screenshot or photo onto it and press Scan. The decoded text appears in a few moments, with the code outlined on the preview so you can see which result belongs to which code. You do not need a second device to point at your screen. This is the way to read a code that arrived in an email, a chat, a PDF or a screenshot someone sent you, and the way to check what a code says before your phone opens it.

What you can scan, and what you cannot

The reader takes image files: PNG, JPEG, WebP, GIF, BMP, SVG and AVIF. A screenshot, a photo of a poster, a picture of a parcel label and a code saved from a web page all work, as long as the code is somewhere in the picture. It does not need to fill the frame. A small code in a large photo is found, and so is more than one code in the same photo.

Where the code isWhat to do
A screenshot or saved imageDrop it straight onto the reader
A photo you tookDrop it in; the whole code and its white margin should be in the shot
Inside a PDFTurn the page into an image with PDF to Image, then read that image
An iPhone HEIC photoConvert it with HEIC to JPG first; the reader will tell you so with a link
On a real object in front of youUse Start camera on the reader page, or your phone's own camera

If the code is in a scanned TIFF or another format the reader does not open, it says the file type is not supported rather than failing silently. Convert it to PNG or JPEG and try again.

Reading a QR code from a screenshot, step by step

1

Add the image

Open the QR code reader and drag the picture onto the drop area, or press Browse files.

2

Choose the code types

Code types is set to QR only by default, which is fastest and gives the fewest false reads. Switch it to QR and barcodes if the picture holds a product barcode, a boarding pass or a shipping label.

3

Press Scan

Scan depth is Thorough by default, which retries low contrast, inverted colours, rotation, noise and tiny codes. Quick makes one pass and is only for large, clean codes.

4

Read the result before acting on it

Each code is listed under Decoded codes with a label such as Link, Wi-Fi, Contact or Text. Press Copy, or read the address first and only then use Open link.

Why a QR code will not read, and what fixes it

Almost every failure has one of a handful of causes. The reader already retries for most of them, so the fix is usually a better picture, not different settings.

ProblemWhat you seeFix
Blur or motionSoft, smeared squaresRetake the photo steadily and a little closer
GlareA bright patch washes out part of the codeTilt the phone or the page so the light slides off, then retake
Too small in the frameThe code is a tiny speck in a big photoCrop closer, or retake it nearer. Thorough depth searches in tiles, which helps a lot
Low contrastGrey on grey, a faded print, dark-mode screenshotThe reader stretches contrast itself; a brighter original helps further
InvertedWhite squares on a black backgroundRead automatically, no action needed
Photo of a screenWavy interference linesMove back slightly, or take a screenshot instead of a photo
No white marginThe code is cropped to its own edgeRecrop with the white border included
Damaged or tornA corner square is missingFind another copy of the code

A QR code carries spare data so it can survive some damage: the common levels recover roughly 7, 15, 25 or 30 percent of the code. That is why a code with a logo in the middle usually still reads. It does not cover the three large corner squares. If one of those is gone, no software can bring it back, and the honest answer is a new copy. To avoid the problem when you make your own codes, see making QR codes that actually scan.

What the result means

A QR code is only text, and the type is a convention about how that text is written. The reader recognises each convention and shows the fields instead of one long string.

LabelWhat it holdsWhat you get
LinkA web addressThe full address, shown before anything is opened
Wi-FiA network name, password and security typeNetwork, Password and Security as separate fields to type into your settings
ContactA vCard or MeCard business cardName, organisation, phone numbers and email addresses
EventA calendar entryTitle, start time and location
LocationMap coordinatesThe coordinates and an Open map button
Email, SMS, PhoneA prepared message or numberA matching button, used only if you press it
TextAnything elseThe raw text, in any language

A Wi-Fi code is the useful one to read on a computer. It shows the exact password, so you can enter it on a laptop or smart TV that has no camera. Remember that a Wi-Fi code posted in a public place hands the network your traffic once you join, so treat it like any open network.

Decode codes from a screenshot or photo and see the content before you open anything. Free: one image at a time, up to 25 MB, with the camera and every recovery pass included. Pro: up to 100 images in one run. It all runs on your device, not our servers.

Read a QR code

A QR code cannot run anything by itself. The risk is the page it sends you to, and fraud that uses printed or emailed codes is often called quishing. Reading the code on a computer is a safe way to look first, because the reader shows the decoded address and never opens it for you.

  • Read the domain, not the wording. Only the part before the first single slash decides where you land. Watch for lookalike spellings and shortener links you do not recognise.
  • Be wary of a sticker. A code stuck over another one on a parking meter, a table or a poster is a common trick. If it looks applied rather than printed, do not use it.
  • Never type a password or card number on a page you reached from a code. Open the company's site yourself instead.
  • Treat an unexpected code in an email like an unexpected link in an email, especially one telling you to act quickly.

Using the camera, and barcodes too

The reader page also has a Start camera button, with a Rear camera and Front camera choice. It reads a code as soon as it is in frame and needs a secure connection and your permission, which you can refuse. On a phone, the built-in camera app is just as good for one code. The page earns its place when you are at a computer and the code is on the screen, or when you want to see the text before following it.

Set Code types to QR and barcodes and the same reader also handles Data Matrix, Aztec, PDF417, EAN, UPC, Code 128, Code 39, Code 93, ITF and Codabar. Retail codes come back as the number printed under the bars. To make your own, use the QR code generator or the barcode generator, and read how to create a barcode for formats and sizes.

If the image is large and the code is small, Thorough depth still finds it. The reader works on up to 24 megapixels; a bigger picture is read at a reduced size rather than refused.

Many codes at once, and privacy

Free reads one image at a time, as often as you like, and finds every code inside that image. Pro queues up to 100 images, removes the 25 MB cap, and downloads the results as CSV, JSON, text or one ZIP. That suits a stock count, a folder of ticket screenshots or a run of asset tags.

QR codes often hold a Wi-Fi password or someone's phone number, which you would not want on a stranger's server. Images and camera frames are decoded on your device and are not uploaded. Your recent scans are kept only on this device, and the Clear button on the history removes them.

Frequently asked questions

How do I scan a QR code from an image or screenshot?

Open the QR code reader, drag the image onto the drop area or press Browse files, then press Scan. The decoded content appears with a label such as Link or Wi-Fi, and the code is outlined on the preview.

Can I read a QR code from a PDF?

Not directly, because the reader opens images, not PDFs. Turn the page into a picture with PDF to Image, then drop that picture into the reader.

Why won't my QR code scan?

The usual causes are blur, glare, a code that is tiny in the photo, low contrast, a missing white margin, or real damage. Retake the picture closer and steadier with the whole code and its border in frame. If a corner square is torn off, you need another copy.

Is it safe to scan an unknown QR code?

Reading one is safe, opening what it points to is where the risk lies. The reader shows the address and never opens it for you, so check the domain first and never enter a password on a page reached from a code.

Can it read barcodes as well as QR codes?

Yes. Switch Code types to QR and barcodes to also read Data Matrix, Aztec, PDF417, EAN, UPC, Code 128, Code 39, Code 93, ITF and Codabar.

Is the QR code reader free?

Yes. Every code type, the recovery passes and the camera are free, one image at a time and up to 25 MB each. Pro adds batches of up to 100 images, one-file export and continuous camera capture.

Keep reading

More in Documents →